Home > Industry News > Electric sectional upgrading door

Electric sectional upgrading door

2019-05-08

Electric sectional upgrading door

First, the scope of use:

1. Applicable to civil and industrial buildings, such as factories, garages, warehouses and other buildings.

2. The width of the door opening is 2400~5400 and the height is 2400~5400. There are 28 kinds of door types for design choice. This type is suitable for areas where the wind load does not exceed 700 pa.

3. Suitable for two wall thicknesses of 240 and 370.

Second, the design description:

1. After the door leaf is opened, it moves to the position above the door hole that does not occupy the lower space. The door leaf has a weight component to balance the weight of the door leaf, and reduces the resistance of the switch door leaf. For ease of use, it is designed for electric manual use. Manually shake the sprocket by hand to drive the chain switch door leaf. According to the use requirements, an electric wireless remote control device can be installed to remotely switch the door leaf, and the control distance is within 30 meters.

2, the door type has insulation door and general door for design selection, the insulation door leaf surface material uses the sandwich panel of colored metal insulation material, and the general door type door leaf adopts the profiled steel plate.

3, the total power of the electric door opener is 1.1 kw, the voltage is AC three-phase 380V, or single-phase 220 V.

Vertical lift gate

Third, the vertical lift door door type selection code:

1 M 2-34 56 7

1:D is electric, S is manual

M: door code

2: Door type code 1 is general type; 2 is heat preservation type

34: Door opening width

56: door height

7: Door opener position (left or right)

Previous: Application prospects of garage doors

Next: Some useful solutions to solve the malfunction problem of medical airtight doors